Sflow Enable - Mellanox Technologies Mellanox SX1018 Command Reference Manual

sflow enable

sflow enable [view-port-channel members]
no sflow enable [view-port-channel members]
Enables sflow on this interface.
The no form of the command disables sFlow on the interface.
Syntax Description view-port-channel mem-
bers
Default disable
no view-port-channel member
Configuration Mode Config Interface Ethernet
Config Interface Port Channel
History 3.3.3500
Role admin
Example
switch(config interface ethernet 1/1)# sflow enable
...
switch(config interface port-channel 1)# sflow enable
Related Commands
Note
Reports sFlow samples and statistics per LAG member.
This option is applicable only on LAG interfaces.
Mellanox® Technologies Confidential
Rev 1.6.9
Mellanox Technologies 418