Ldap Bind-Dn/Bind-Password - Mellanox Technologies Mellanox SX1018 Command Reference Manual

ldap bind-dn/bind-password

ldap {bind-dn | bind-password} <string>
no ldap {bind-dn | bind-password}
Gives the distinguished name or password to bind to on the LDAP server. This can be
left empty for anonymous login (the default).
The no form of the command resets the attribute to its default values.
Syntax Description string
Default ""
Configuration Mode Config
History 3.1.0000
Role admin
Example
switch (config) # ldap bind-dn my-dn
switch (config) # ldap bind-password my-password
switch (config) # show ldap
User base DN
User search scope : subtree
Login attribute
Bind DN
Bind password
Group base DN
Group attribute
LDAP version
Referrals
Server port
Search Timeout
Bind Timeout
SSL mode
Server SSL port
SSL cert verify
LDAP servers:
1: 10.10.10.10
2: 10.10.10.12
switch (config) #
Related Commands show ldap
Note For anonymous login, bind-dn and bind-password should be empty strings "".
A case-sensitive string that specifies distinguished
name or password to bind to on the LDAP server.
: ou=department,dc=example,dc=com
: sAMAccountName
: my-dn
: my-password
:
: member
: 3
: yes
: 389
: 5
: 5
: none
: 636 (not active)
: yes
Mellanox® Technologies Confidential
Rev 1.6.9
Mellanox Technologies 159