This valve joint 1 prevents fuel from flowing
out and is installed to the fuel tank breather
In this installation, make sure the arrow
faces the fuel tank and also downward.
This sidestand 1 is used to support only the
machine when standing or transporting it.
Never apply additional force to the side-
Remove this sidestand before starting
This nipple wrench 1 is used to tighten the
AIR FILTER CASE COVER
In order to prevent water from entering the car-
buretor while the machine is operated in the
rain, attach the air filter case cover 1 to the
Air filter case cover installation
1. Set the air filter case cover as shown, and
install it to the seat rail of the rear frame
while rotating air filter case cover in the
direction of the arrow.
2. Using a conventional screwdriver, hold up
the front of the air filter case cover.
Then engage the groove a in the cover
over the air filter case edge b.
1 - 11