FRONT WHEEL AND REAR WHEEL
5 - 5
ASSEMBLY AND INSTALLATION
Bearing (left) 1
Bearing (right) 3
Oil seal 4
Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
Use a socket that matches the outside diam-
eter of the race of the bearing.
Left side of bearing shall be installed first.
Install the oil seal with its manufacture's
marks or numbers facing outward.
Do not strike the inner race of the bearing.
Contact should be made only with the outer
Brake disc 1
Bolt (brake disc) 2
12 Nm (1.2 m · kg, 8.7 ft · lb)
Apply the lithium soap base grease on the oil
Install the brake disc 1 between the brake
pads 2 correctly.