1 Sub-wire harness
2 CDI unit
3 Ignition coil
4 Clutch cable
5 Cable guide
6 Transmission oil breather hose
7 CDI unit band
9 Brake hose
0 Brake hose holder
A Hose guide
B Reservoir hose
C Reservoir tank
D Brake master cylinder
CABLE ROUTING DIAGRAM
È Pass the transmission oil breather hose through
the hose guide.
É Clamp the sub-wire harness at the tape on it
within the arrow mark.
Ê Pass the sub-wire harness on the left of the CDI
Ë Pass the reservoir hose between the brake hose
and swingarm bracket.
Ì Pass the reservoir hose through the hose guides.
Í Install the brake hose so that its pipe portion
directs as shown and lightly touches the projec-
tion on the brake master cylinder.
2 - 17