Yamaha YZ85(S)/LC Owner's Service Manual page 284

Table of Contents

Install the bearing by pressing its outer race

Impeller shaft

Impeller shaft 1

Take care so that the oil seal lip is not dam-

aged or the spring does not slip off its posi-

When installing the impeller shaft, apply the

lithium soap base grease on the oil seal lip

and impeller shaft. And install the shaft while

Hold the impeller shaft on its width across

the flats a with spanners, etc. and install the

Gasket (water pump housing) 1

Water pump housing 1

Bolt (water pump housing) 2

Copper washer (coolant drain bolt)

Coolant drain bolt 4

14 Nm (1.4 m · kg, 10 ft · lb)

10 Nm (1.0 m · kg, 7.2 ft · lb)

Show Quick Links

Table of Contents