Viewing And Editing Group Properties - Brocade Communications Systems Brocade 8/12c Administrator's Manual
Supporting hp secure key manager (skm) environments and hp enterprise secure key manager (eskm) environments
Hide thumbs
Also See for Brocade 8/12c:
- User manual (1301 pages) ,
- Command reference manual (1132 pages) ,
- Reference (362 pages)
Table of Contents
Advertisement
2
Viewing and editing group properties
2. Select an encryption engine from the Encryption Center Devices table, then select Engine >
3. In the Encryption Engine Properties table, locate Set State To.
4. Click the adjacent Engine field and select Enabled or Disabled accordingly.
5. Click OK.
Viewing and editing group properties
To view encryption group properties, complete the following steps.
1. Select Configure > Encryption from the menu task bar.
2. Select a group from the Encryption Center Devices table, then select Group > Properties from
FIGURE 81
98
Properties from the menu task bar, or right-click an encryption engine and select Properties.
The Encryption Properties dialog box displays.
The Encryption Center dialog box displays.
the menu task bar, or right-click a group and select Properties.
NOTE
If groups are not visible in the Encryption Center Devices table, select View > Groups from the
menu task bar.
The Encryption Group Properties dialog box displays.
Encryption Group Properties dialog box
The dialog box includes the following tabs:
•
"General tab"
on page 99
•
"Members tab"
on page 100
•
"Security tab"
on page 103
Fabric OS Encryption Administrator's Guide
53-1002159-03
Advertisement
Table of Contents
Troubleshooting
