Enabling Max Payload Size - HP BL860c Administrator's Manual
Microsoft windows server 2008 sp2 and windows server 2008 r2 on integrity servers
Hide thumbs
Also See for BL860c:
- Datasheet (511 pages) ,
- User's & service manual (184 pages) ,
- Deployment manual (84 pages)
Table of Contents
Advertisement
NOTE:
SSTK does not provide a tool to configure Cell-Local Memory mode.
Enabling Max Payload Size
The Max Payload Size (MPS) enables or disables hardware optimizations to the installed operational
system. Enable MPS on the EFI Shell by using the following command:
EFI Shell> ioconfig
mps_optimize on
This activates on the PcieMpsOptimization EFI variable. This optimization is implemented in
systems with firmware version 3.01 or greater. Windows Server 2008 can take advantage of the
MPS optimization feature.
Enabling Max Payload Size
33
Advertisement
Table of Contents
