HP BL860c Administrator's Manual page 41

Table 4 hpacuscripting Error Codes (continued)
Warning Message
Code
2865
Invalid Preferred Path
2866
Failure opening capture file
text
2867
Failure opening input file
text
2868
Failure opening error file
text
2877
There are no suitable spares
available
2880
Invalid Drive Type Specified
2882
Invalid MNP delay
3000
Invalid Option
3002
Command Failed
3003
License Key Delete Failed
3004
Invalid Sector Size
3005
Cannot delete Array
3006
Invalid Number of Parity
Groups
3007
Chassis name is too long
3008
Chassis name is already in
use
3009
Auto Configure failed
3010
Cannot extend logical drive,
not enough free space for
the requested size
301 1
Cannot extend logical drive,
requested size is too small
3012
Cannot specify both SIZE and
SHRINKSIZE
3013
Cannot shrink Array
3014
Cannot move Array
3015
Invalid operation - Advanced
Pack support required
3016
Spare drives cannot be
specified by a count in
Reconfigure mode
3017
Disk drives cannot be
specified by a count in
Reconfigure mode
3018
Invalid number of physical
disks
Reason
The preferred path specified is not a valid chassis slot for an
available active controller, or the controller is not available.
—
—
—
ACU found no drives that can be used as spares for the specified
array.
—
The specified value for MNP delay is invalid.
The value of the option supplied to this parameter is invalid.
The controller returned an error for a command.
ACU is unable to delete the license key.
—
—
—
—
Another controller is already using the entered chassis name.
The Auto Configure mode was unable to complete auto
configuration
—
—
The input file cannot specify both a SIZE and SHRINKSIZE
parameter.
The array shrink operation was not successful.
The array move operation was not successful.
The requested operation requires a valid license key to be entered.
When in Reconfigure mode, the requested spare drives must be
specified by their addresses. A simple count cannot be used.
When in Reconfigure mode, the requested data drives must be
specified by their addresses. A simple count cannot be used.
—
hpacuscripting 41