Enabling Advanced Ilo Functionality - HP Integrated Lights-Out User Manual

Installing or updating iLO Linux and SUSE drivers
If necessary, uninstall earlier agents. To uninstall earlier agents, execute the following:
rpm -e cmanic
rpm -e hprssm
rpm -e hpasm
To load the health and iLO driver packages use the following commands :
rpm –ivh hpasm-d.vv.v-pp.Linux_version.i386.rpm
rpm –ivh hprsm-d.vv.v-pp.Linux_version.i386.rpm
where: d is the Linux distribution and version and
vv.v-pp are version numbers.
For additional information, refer to the Software and Drivers website (http://www.hp.com/support).
To remove the health and iLO drivers, use the following commands:
rpm –e hprsm
rpm –e hpasm
For additional information, refer to the Software and Drivers website (http://www.hp.com/support).

Enabling advanced iLO functionality

The Licensing page enables you to view the current license status and enter a key to activate iLO license
features. The iLO version number and current license information appear in this section. If a license is
installed, the license number appears. Evaluation licenses are also shown. To install a license, see
"Activating iLO licensed features using a browser (on page 22)" to install a license.
You must use a license key to activate certain iLO features. Optional licenses activate features that are not
bundled with an unlicensed system.
iLO Select license enables access to the following iLO features in addition to iLO standard features:
Directory-enabled authentication and authorization
page 134)
Power regulator for ProLiant (on page 84)
Scripted virtual media (on page 86)
Applet virtual media (on page 86) (including Virtual Floppy and Virtual CD)
Two-factor authentication
In addition to iLO Standard and Select features, the iLO Advanced Pack enables access to the following
features in addition to iLO Standard and Select features:
Graphical remote console (on page 71)
Terminal Services pass-through option (on page 36)
Advanced features are enabled by licensing the optional iLO Advanced Pack. The iLO Advanced Pack
contains an activation key that you must enter to enable advanced features. Advanced features can be
evaluated using an evaluation key.
("Two-Factor Authentication
("Directory-enabled remote
Settings" on page 33)
management" on
Configuring iLO 20