Error Reporting - HP BL860c Administrator's Manual

WriteCache= 50
RebuildPriority= Low
ExpandPriority= Low
SurfaceScanDelay= 15
; Array Specifications
Array= A
; Array Drive Type is SAS
; 1E:1:1 (36 GB),1E:1:2 (36 GB),1E:1:3 (36 GB)
Drive= 1E:1:1,1E:1:2,1E:1:3
OnlineSpare= No
; Logical Drive Specifications
LogicalDrive= 1
RAID= 5
Size= 69399
Sectors= 32
StripeSize= 16
ArrayAccelerator= Enabled

Error reporting

When using the hpacuscripting utility, any errors are logged to the error.ini file. This file
displays the error code, error message, and if possible, lists the controller, array, or logical drive
associated with the error.
Error codes are also returned to the calling process, enabling scripting clients to use the return
code instead of parsing the error file.
The format of the error file is as follows:
ACU Configuration Replication Error
ERROR: (error code) error description
Controller: Slot # | SerialNumber # | WWN #
Array: #
Logical Drive: #
Table 3 hpacuscripting Warning Codes
Warning
Code Message
4000
License key is already
installed
4001
Clear configuration command
failed - configuration is
already cleared
4002
Chassis name is already set
to this value
4003
One or more controller
commands were skipped because
the controller is not
configured
4004
Using Repeat function
38 Utilities reference
Reason
The input file specified a license key. However, a license key is
already installed on the controller.
The -reset option was used on a controller that does not have
a configuration.
The chassis name is already set to the supplied value. The
command is ignored.
Certain commands require that the controller be configured before
they can be sent to the controller.
Some commands have been ignored because the Repeat
parameter has been specified in the input file.