Loading Rfid Media; Setting The Size And Type Of The Rfid Media; Loading Media Trays - Lexmark CS725R Integration Manual

Loading RFID media

Loading RFID media

Setting the size and type of the RFID media

1
From the home screen, navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type > select a paper source
2
Set the size and type of the RFID media.

Loading media trays

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Remove the tray.
Note: To avoid jams, do not remove trays while the printer is busy.
2
Adjust the guides to match the size of the RFID media that you are loading.
Note: Use the indicators on the bottom of the tray to position the guides.
3
Load the media stack with the printable side faceup.
The capacity of the media tray is up to 200 sheets. To maximize the capacity, make sure that:
•
The media weight is 75 g/m
•
The RFID tag thickness is not more than 0.35 mm (0.01 in.).
•
The RFID tag is placed toward the back of the tray.
²
(20 lb).
20