Web: Setting Passwords And Usernames; Snmp: Setting Passwords And Usernames - HP ProCurve 6120G/XG Manual

If you want to remove both operator and manager password protection, use
the no password all command.

Web: Setting Passwords and Usernames

In the web browser interface you can enter passwords and (optional) user-
names.
To Configure (or Remove) Usernames and Passwords in the Web
Browser Interface.
1. Click on the
Security
Click on
[Device Passwords]
2. Do one of the following:
• To set username and password protection, enter the usernames and
passwords you want in the appropriate fields.
• To remove username and password protection, leave the fields blank.
3. Implement the usernames and passwords by clicking on

SNMP: Setting Passwords and Usernames

Usernames and passwords for Manager and Operator access can also be
configured using SNMP. For more information, refer to "Using SNMP To View
and Configure Switch Authentication Features" on page 5-30.
Configuring Username and Password Security
Configuring Local Password Security
tab.
.
.
[Apply Changes]
2-9