Replacing A Hot-Plug Fan - HP ProLiant DL585 User Manual
Proliant
Hide thumbs
Also See for ProLiant DL585:
- User manual (166 pages) ,
- Maintenance and service manual (112 pages) ,
- Quickspecs (57 pages)
Table of Contents
Advertisement
Installing hardware options
Replacing a hot-plug fan
1. Extend the server from the rack. Refer to "Extending the server from the rack" in
Chapter 2, "Server operations."
2. Remove access panel. Refer to "Removing the access panel" in Chapter 2,
"Server operations."
3. Identify the nonfunctioning fan by locating an amber LED on the QuickFind
diagnostic display or at the top of failed fan.
4. Remove the nonfunctioning fan.
Figure 4-32: Removing a hot-plug fan
4-32
HP ProLiant DL585 Server User Guide
Advertisement
Table of Contents
