HP ProLiant DL585 User Manual page 147

Table E-9: BBWCE LED descriptions
Server status
Server is on and is in the
first 30 seconds after
power-up
Server is off and is in data
retention mode
CAUTION: After the server is powered down, wait 15 seconds and then check the
illumination pattern of the LEDs before unplugging the cable from the battery module.
•
•
When the server is on, review the POST message before plugging or unplugging the
cable from the battery module.
HP ProLiant DL585 Server User Guide
continued
LED color
Amber (1) or
green (2)
Amber (1)
If the amber LED blinks after 15 seconds, do not remove the cable
from the battery module. This module is backing up data, and data will be lost if
the cable is detached.
If neither LED blinks after 15 seconds, it is safe to remove the
cable from the battery module.
LED status Battery module status
On Temporary lock-out state; data
was lost due to cable being
detached
Blinking every User data held in write cache is
15 seconds being backed up
System LEDs and switches
E-11