Removing And Replacing Drives; Removing And Replacing A Hot-Plug Drive - HP HPE ProLiant DL180 Gen10 Maintenance And Service Manual

To replace the blank, slide the blank into the bay until it locks into place.

Removing and replacing drives

Removing and replacing a hot-plug drive

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all
bays are populated with either a component or a blank.
Procedure
1. Back up all server data on the drive.
2. Determine the status of the drive from the drive LED definitions.
3. Remove the drive.
• LFF
• SFF
Removal and replacement procedures 41