Server Operations; Powering Up The Server; Powering Down The Server - HP ProLiant DL585 User Manual

Powering up the server

To power up the server, press the Power on/Standby button.

Powering down the server

WARNING: To reduce the risk of personal injury, electric shock, or damage to
the equipment, remove the power cord to remove power from the server. The
front panel Power on/Standby button does not completely shut off system
power. Portions of the power supply and some internal circuitry remain active
until AC power is removed.
IMPORTANT: If installing a hot-plug device, it is not necessary to power down the server.
1. Back up the server data.
2. Shut down the operating system as directed by the operating system
documentation.
HP ProLiant DL585 Server User Guide

Server operations

2
2-1