Video Input
S-Video Input
RGB Analog Input - Sync On Green
RGB3S/RG3SB Input - Separate Sync
RGB3S/RG3SB Input - Sync On Green
Component Input - Separate Sync
Component Input - Sync On Y
Component Input - Tri-Level Separate Sync
Component Input - Tri-Level Sync On Y
Data[2]
\x00
\x01
n
Note :
- The external switcher has to be connected to the
projector the same way a BARCO 800 peripheral is
normally connected. (See the Owner's Manual of your
projector)
- The source number (Data[0]) can be used to make sure
the correct file is loaded.
Mode
-
360