Communication settings summary
Baud rate
Data bits
Parity
Stop bits
n
Baud Rate :
Defines the speed of the data transfer.
The baud rate can be set, depending on the type of
projector, using the dip switches on the processor board of
the projector or using the menu structure.
Consult the Owner's Manual of the projector on how to
change the baud rate setting !
n
Data Bits :
Eight data bits are used for each character of the data
transfer.
n
Parity :
There is NO parity bit used to perform error checking.
n
Stop Bits :
One stop bit is used to define the end of a character.
see Owner's Manual
8
no
1
19