Barco BarcoGraphics Maxwell/ 6300 User Manual page 99

n
Description :
Change de pc baudrate.
n
Command :
Command[0]
n
Data :
Data[]
n
Notes :
- The acknowledge is sent at the same baudrate as the
question. The baudrate will be changed after transmission
of the acknowledge sequence.
- If the data contains a non-valid c-language string or an
invalid baudrate, the baudrate will be set to 9600.
n
Example :
Change the pc baudrate to 2400 baud of a projector with
address \x01.
Transmit
Start
Projector address
Command[0]
Data[0]
Data[1]
Data[2]
Data[3]
Data[4]
Checksum
Stop
\x75
c-language string
\xfe
\x01
\x75
\x32 (= '2')
\x34 (= '4')
\x30 (= '0')
\x30 (= '0')
\x00
\x3c
\xff
99