n
Description :
Change the value of the black level.
n
Command :
Command[0]
Command[1]
Command[2]
n
Data :
Data[0] = soft edge black level.
n
Projector type :
All projectors equipped with soft edge, except simulation
products.
n
Example :
Set the value of red soft edge black level to 100 (\x64) on a
projector with address \x01.
Transmit
Start
Projector address
Command[0]
Command[1]
Command[2]
Data[0]
Checksum
Stop
\x20
\x84
\x00 in case of red black level
\x01 in case of green black level
\x02 in case of blue black level
\xfe
\x01
\x20
\x84
\x00
\x64
\x09
\xff
450