Barco BarcoGraphics Maxwell/ 6300 User Manual page 261

n
Description :
Read the maximum lamp run time in seconds. This is the
maximum guaranteed run time for the lamp.
n
Command :
Command[0]
Command[1]
n
Data :
No data bytes.
n
Return data :
The return data-transfer being the maximum lamp run time
in seconds consists of four data bytes. The first byte is the
most significant byte !
Formula :
Maximum lamp run time (seconds)
= Data[0]*256 3 + Data[1]*256 2 + Data[2]*256 + Data[3]
n
Projector type :
Not all projectors support this command.
n
Example :
Read the maximum lamp run time of a projector with
address \x01. Suppose the maximum is 1000 hours.
Transmit
Start
Projector address
Command[0]
Command[1]
Checksum
Stop
\x76
\x89
\xfe
\x01
\x76
\x89
\x00
\xff
261