Side Access Panels - GE Profile PT925 Technical Service Manual

9. To access the slider board assembly, remove the
3/8 -in. nut securing the insulating cover.
10. To remove the board from the slider board
assembly, press the two tabs securing the
board to the slider and lift the board from the
assembly.

Side Access Panels

There are two side panels on each side of the oven.
To remove the side access panels:
1. Remove the oven. (See
2. On each side of the oven, remove the four 1/4-
in. hex-head screws that hold the side trim in
place.
Panel One
Panel Two
Left Side Shown
3. Remove the two T10 Torx screws that hold the
bracket to the oven.
4. Remove the 1/4-in . hex-head screws that hold
the two side panels to each side of the oven.
There are 46 hex-head screws on the left side
and 41 screws on the right side.
1 of 46
Left Side Shown
– 33 –
.)
Oven Removal
Side Trim
Bracket