Racks, Elements, Panels - GE JRP20BJBB Owner's Manual

Racks, Elements, Panels

Control Panel
Clean with mild soap and water or vinegar and water,
rinse with clean water and polish dry with a soft cloth.
Molded rib
Spring clip
Clear groove
in stem
Painted Surfaces
Clean with soap and water or a vinegar and water
solution.
Glass Surfaces
To clean the outside glass finish, use a glass cleaner.
Rinse and polish with a dry cloth.
Stainless Steel Surfaces
To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always
wipe the surface in the direction of the grain. Follow
the cleaner instructions for cleaning the stainless steel
surface.
49-2000958 Rev. 0
Oven Racks
Clean the oven racks with an abrasive
cleanser or steel wool. After cleaning,
rinse the racks with clean water and dry
with a clean cloth.
NOTE: The shiny, silver-colored oven
racks (on some models) may be cleaned
in the self-cleaning oven. However, the
racks will darken in color, lose their luster
and become hard to slide if cleaned during
the self-cleaning cycle.
Oven Heating Elements
element. Any soil will burn off when the
elements are heated.
Control Knob
(on some models)
The control knobs may be removed for
easier cleaning.
Make sure the knobs are in the OFF
positions and pull them straight off the
stems for cleaning.
(on some models)
Racks may become difficult to slide,
especially after a self-clean. Put some
vegetable oil on a soft cloth or paper towel
and rub onto the left and right edges.
NOTE:
a discoloring or a rust like color residue
on the racks and cavity sides. To clean
this residue, use a soap and water or a
vinegar and water solution. Rinse with
clean water and dry with a soft cloth.
To clean the oven floor, gently lift the bake
element. Clean with warm soapy water.
plastic scouring pads or oven cleansers on the control
vinegar and hot water works well.
The knobs can be cleaned in a dishwasher
or they may also be washed with soap and
water. Make sure the inside of the knobs
are dry before replacing.
Replace the knobs in the OFF position to
ensure proper placement.
powders, steel wool or harsh abrasives on any painted
surface.
oven door while cleaning.
To inquire about purchasing stainless steel appliance
cleaner or polish, or to find the location of a dealer
GEAppliances.com
17