Lexmark X203N And X204N - Lexmark MS610dn Manual

Printer specifications
•
Use labels that can withstand temperatures of 180°C (356°F) without sealing, excessive curling, wrinkling, or
releasing hazardous emissions.
•
Verify that your label adhesive material can tolerate a fusing temperature of 180°C (356°F) for 0.1 second.
•
Use labels that can withstand pressure of 25 pounds per square inch (psi).
• Do not print within 1 mm (0.040 in.) of the edge of the label, of the perforations, or between die-cuts of the label.
• Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.040 in.) away from edges. Adhesive material will contaminate your printer and could void your
warranty.
•
If zone coating of the adhesive is not possible, a 3‑mm (0.125‑in.) strip should be removed on the leading and driver
edge, and a non‑oozing adhesive should be used.
•
Remove a 3‑mm (0.125‑in.) strip from the leading edge to prevent labels from peeling inside the printer.
• Portrait orientation is preferred, especially when printing bar codes.
•
Do not use labels that have exposed adhesive.
•
Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.
•
Do not load a sheet of labels through the machine more than once.
• Load labels into the manual bypass feeder with the recommended print side faceup and the top edge going in first.
When printing on card stock:
•
Set the Paper Type to Card Stock from the printer driver.
•
Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting
introduces semi‑liquid and volatile components into the printer.
•
Do not use card stock that is creased. It may cause paper jams.
•
We recommend the use of grain short card stock.
•
Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in
first.

Lexmark X203n and X204n

Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend printing
more than 20 pages of labels a month. For best results, feed labels from the paper tray.
The Lexmark X203n and X204n printer models support stocks up to 90 g/m
2
(24 lb).
107