Optra N - Lexmark MS610dn Manual

Printer specifications
When printing on card stock:
• From the operator panel or MarkVision Professional, set the Paper Type to Card Stock.
•
Do not use preprinted card stock manufactured with chemicals that may contaminate the printer.
•
Do not use card stock that is creased. It may cause paper jams.
•
To minimize curl, make sure the rear exit bin is open so the card stock feeds straight out the back of the printer.
• We recommend the use of grain short card stock.
For more information, see

Optra N

Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
Always feed labels from the multipurpose tray. The multipurpose tray can hold up to 50 sheets of labels.
The Optra N supports print materials up to 128 g/m
The following table lists the maximum weights supported by the multipurpose tray.
Paper source
Multipurpose Tray
For paper and transparency specifications, see the printer User's Guide.
Labels
* 150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
"Maintenance procedures" on page
Index Bristol
—
Width: 210–216 mm (8.3–8.5 in.)
Length: 279–356 mm (11–14 in.)
Weight:
120–128 g/m
Thickness: 0.13–0.20 mm (0.005–0.008 in.)
Smoothness: 100–400 Sheffield*
14.
2
(34 lb).
Card stock
Tag
—
2
(32–34 lb)
Labels
Cover Paper
—
2
128 g/m
156
Vinyl
—