Lexmark E260, E260D, E260Dn, E360D, E360Dn, E460Dn, E460Dw, And E462Dtn - Lexmark MS610dn Manual

Printer specifications
Labels Width:
Length:
Weight:
Thickness:
Smoothness:
*150–250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation.
Card stock Weight:
Note: To minimize curl, use the rear exit when printing on card stock and labels.
For more information, see
Lexmark E260, E260d, E260dn, E360d, E360dn, E460dn,
E460dw, and E462dtn
Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using
vinyl or polyester labels.
The printer supports paper and label stock from 60–90 g/m
up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one sheet at a time.
The following table lists the maximum weights supported by Tray 1, Tray 2, and the manual sheet feeder.
Paper source
Tray 1
Tray 2
Manual Feed
Card stock should be grain short and set to exit the rear door.
For paper and transparency specifications, see the printer publications CD.
210–216 mm (8.3–8.5 in.)
279–297 mm (11–11.7 in.)
Up to 90 g/m
Up to 0.25 mm (0.01 in.)
100–400* Sheffield
Up to 163 g/m
Up to 163 g/m
"Maintenance procedures" on page
Index Bristol
—
—
2
163 g/m
2
(24 lb)
2
Index Bristol (90 lb)
2
Tag (100 lb)
14.
2
and index card stock up to 163 g/m
Card Stock
Tag
—
—
2
163 g/m
2
(43 lb). You can load
Labels
Cover Paper
—
90 g/m
—
90 g/m
—
90 g/m
71
2
2
2