System Settings - Dell C2660dn User Manual

Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the time-out
time is exceeded.
Values:
Off
* *
On 30 seconds
Available Range:
5–300 seconds

System Settings

Use System Settings to configure the power saving mode, warning tones, time-out duration, display language,
and job log auto print settings.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Power Saver Timer
CAUTION:
If the Power Off Timer feature is set and the power is turned off, stored data in RAM Disk is cleared.
Purpose:
To specify the time for transition to power saver mode.
Values:
Sleep 10 minutes
Available Range: 1–30 minutes
Deep Sleep 20 minutes
Available Range: 1–30 minutes
*1
Power Off Timer Auto Detect
On
Off
*1
Power Off Timer feature is available only in certain regions.
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 30 minutes for power saver mode if you want a balance between energy consumption
and a shorter warm-up period.
178
Understanding the Printer Menus
Disables the job time-out.
Sets the time the printer waits for data to arrive from the computer.
*
Specifies the time taken by the printer to enter Sleep mode after it
finishes a job.
*
Specifies the time taken by the printer to enter Deep Sleep mode
after it has entered Sleep mode.
* *
180 minutes Detects whether the printer is connected to a network via Ethernet
or wireless. If the printer is connected to a network, Power Off
Available Range:
Timer is disabled. If the printer is not connected to a network
60–1440 minutes
(connected via USB or Wi-Fi Direct), the printer automatically
turns off after the specified time has elapsed. Specify the time it
takes to automatically turn off the printer after it has entered Deep
Sleep mode.
*
180 minutes Specifies the time it takes to automatically turn off the printer after
it has entered Deep Sleep mode.
Available Range:
60–1440 minutes
Disables Power Off Timer.