Banding - Dell C2660dn User Manual

Banding

Action
1 Locate the cause of the problem using the Pitch Configuration Chart.
Launch the Tool Box, and click Chart Print on the Diagnosis tab.
a
Click Pitch Configuration Chart.
b
The Pitch Configuration Chart is printed.
Is the cause of the problem located?
2
Replace the drum cartridges.
Replace the drum cartridges. See "Replacing the Drum Cartridges."
a
After you replace the drum cartridges, click Chart Print on the
b
Diagnosis tab.
Click Pitch Configuration Chart.
c
The Pitch Configuration Chart is printed.
Does this solve your problem?
3 Replace the fusing unit.
Replace the fusing unit. See "Replacing the Fusing Unit."
a
After you replace the fusing unit, click Chart Print on the Diagnosis
b
tab.
Click Pitch Configuration Chart.
c
The Pitch Configuration Chart is printed.
Does this solve your problem?
4
Replace the transfer belt unit, the 2nd BTR, and the retard roller.
Replace the transfer belt unit, the 2nd BTR, and the retard roller. See
a
"Replacing the Transfer Belt Unit, the 2nd Belt Transfer Roller (2nd
BTR), and the Retard Roller."
After you replace the transfer belt unit, the 2nd BTR,
b
roller, click Chart Print on the Diagnosis tab.
Click Pitch Configuration Chart.
c
The Pitch Configuration Chart is printed.
Does this solve your problem?
Yes
Proceed to the action
corresponding to the
location of the
problem:
• Drum cartridge - 2
• Fusing unit - 3
• Transfer belt unit - 4
The task is complete.
The task is complete.
The task is complete.
and the retard
No
Contact Dell.
Contact Dell.
Contact Dell.
Contact Dell.
335
Troubleshooting Guide