Dell C2660dn User Manual page 140

Wireless LAN
NOTE:
Wireless LAN feature is available only when the printer is connected using the wireless network.
Purpose:
To configure the detailed setting for the wireless network.
To use the wireless adapter, be sure to disconnect the Ethernet cable.
NOTE:
Once wireless LAN is activated, wired LAN protocol will be disabled.
Values:
Wireless Settings SSID
Network Type
MAC Address
Link Channel
Link Quality
Security Settings Encryption
WEP Encryption
WEP Key 1
Re-enter WEP Key 1
WEP Key 2
Re-enter WEP Key 2
138
Dell™ Printer Configuration Web Tool
Sets the name that identifies the wireless network. Up to 32 alphanumeric
characters can be entered.
Sets the network type from either Ad-Hoc or Infrastructure.
Displays the MAC address of the wireless adapter for the printer.
Displays the channel number of the wireless connection for the printer.
Displays the quality of the wireless network connection for the printer.
Select the encryption type from the list.
No Security Sets No Security to configure the wireless
setting without specifying an encryption type
from WEP , WPA-PSK, and WPA-Enterprise.
WEP Sets the WEP to use through the wireless
network.
*1, 2
WPA-PSK TKIP Sets the WPA-PSK TKIP to use through the
wireless network.
WPA-PSK AES/WPA2-PSK Sets the WPA-PSK AES/WPA2-PSK AES to
*1, 2
AES use through the wireless network.
WPA-Enterprise Sets the WPA-Enterprise TKIP to use
*2, 3
TKIP through the wireless network.
WPA-Enterprise Sets the WPA-Enterprise AES/WPA2 ­
AES/WPA2-Enterprise Enterprise AES to use through the wireless
*2, 3
AES
network.
*1, 2
Mixed Mode PSK Sets the Mixed Mode PSK to use through the
wireless network. Mixed Mode PSK
automatically selects the encryption type
from either WPA-PSK TKIP , WPA-PSK AES,
or WPA2-PSK AES.
Mixed Mode Sets the Mixed Mode Enterprise to use
*2, 3
Enterprise through the wireless network. Mixed Mode
Enterprise automatically selects the
encryption type from either WPA-Enterprise
TKIP , WPA-Enterprise AES, or WPA2­
Enterprise AES.
Select the WEP key code from either Hex or Ascii.
Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Enters the WEP key 1 again to confirm it.
Sets the WEP key set used through the wireless network only when WEP
128bit or WEP 64bit is selected for Encryption.
Enters the WEP key 2 again to confirm it.