Dell C2660dn User Manual page 189

Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part of
the page currently printing)
Values:
*
K Offset 0
Available Range: -5 to +5
*
YMC Offset 0
Available Range: -5 to +5
Adjust 2nd BTR
NOTE:
. The print quality changes depending on the setting values you select for this item.
Purpose:
To specify the transfer roller voltage adjustment for each paper type.
Values:
*
Plain 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Plain Thick 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Covers 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Covers Thick 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Coated 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Coated Thick 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Label 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Envelope 0
Available Range:
(Lighten) -5 to (Darken) +10
*
Recycled 0
Available Range:
(Lighten) -5 to (Darken) +10
If faint black colored ghosts appear, try to decrease the value.
If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease
the value.
Sets the transfer roller voltage in increments of 1. The default
settings may not give the best output on all paper types. If you see
mottles on the print output, try to increase the voltage. If you see
white spots on the print output, try to decrease the voltage.
Understanding the Printer Menus
187