Storing Print Media; Identifying Print Media And Specifications; Supported Paper Sizes - Dell C2660dn User Manual

• Do not use label sheets that have adhesive to the edge of the sheet. It is recommended that zone coating of the
adhesive is done at least 1 mm (0.04 inches) away from edges. Adhesive material contaminates your printer and
could void your warranty.
WARNING:
Otherwise a jam occurs in the printer and contaminate your printer and your cartridges with adhesive. As a result,
could void your printer and cartridge warranties.

Storing Print Media

For proper print media storage, the following guidelines will help to avoid media feeding problems and uneven print
quality.
• Store print media in an environment where the temperature is approximately 21 °C (70 °F) and the relative
humidity is 40 %.
• Store cartons of print media on a pallet or shelf, rather than directly on the floor.
• If you store individual packages of print media out of the original carton, ensure that they rest on a flat surface so
that the edges do not buckle or curl.
• Do not place anything on top of the print media packages.

Identifying Print Media and Specifications

The following tables show print media information.

Supported Paper Sizes

Paper size
A4 (210 x 297 mm)
B5 (182 x 257 mm)
A5 (148 x 210 mm)
Letter (8.5 x 11 in)
Folio (8.5 x 13 in)
Legal (8.5 x 14 in)
Executive (7.25 x 10.5 in)
Envelope #10 (4.125 x 9.5 in)
Monarch (3.875 x 7.5 in)
DL (110 x 220mm)
C5 (162 x 229mm)
*1, 2
Custom
*1
Custom: width: 76.2 mm (3.0 inches) to 215.9 mm (8.5 inches) for the MPF; 148 mm (5.83 inches) to 215.9 mm (8.5 inches) for tray1 and the
optional 550-sheet feeder
length: 127.0 mm (5.0 inches) to 355.6 mm (14.00 inches) for the MPF; 210 mm (8.27 inches) to 355.6 mm (14.00 inches) for tray1
and the optional 550-sheet feeder
*2
XPS driver does not support custom size paper.
MPF Tray1
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y N
Y N
Y N
Y N
Y Y
Optional 550-sheet Duplex unit
feeder
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
N N
N N
N N
N N
Y Y
Print Media Guidelines
205