Step 11 Install Toekick Assembly; Step 12 Install Side Filler Strips - GE Monogram ZBD5600 Installation Instructions Manual

• Install toekick slides to toekick support
Step 11
Install
• Align front and inner toekicks, matching
Toekick
Assembly
• Align toekick to second screw hole in
• Install color matched screws "E" through
• Carefully, slide assembly back until it is
• Adjust the height of the panel by loosening
• Carefully, hold the door and open fully.
• Adjust toekick height if necessary.
• Tighten screws.
• Side trim filler strips are packed with this
Step 12
Install
Side Trim
• Open the door fully.
• Place side trim against dishwasher tub and
• Adjust trim to correct width. Tighten screws.
brackets. Use slide stamped "L" on left and
"R" on right side.
screw holes.
toekick slide as illustrated.
the front of the toekick and into the toekick
slides. Do not tighten screws.
aligned with adjacent cabinetry toekick.
screws and sliding the front panel down,
even with the floor.
Ensure that door does not strike top of
toekick.
dishwasher. If the cabinet cutout is wider
than the dishwasher, install the filler strips
on both sides of the dishwasher to cover
gaps.
install 2 screws, loosely on each side.
Installation
Front Toekick Panel
Slide toekick out
Screw E
Side
Trim
Stainless Steel Interior Dishwasher
Inner Toekick
Pull tab while
Attachment Screws
Pushing toekick in
Screw B
Left Side
Toekick
Slide
15