1/4" Thick Custom Door Panel; Zpf75 Door Panel Kit - GE Monogram ZBD5600 Installation Instructions Manual

ZPF75B, Black
ZPF75W, White
Tools and Materials required
• Phillips screwdriver
• Gloves to protect against sharp edges
• Nut driver
• Metal door
Kit Contents
• Support bracket
• Label
• 18 Screws
• 2 Door springs
(10) Wood Screws
The custom panel should be constructed in
Step 1:
the same manner as cabinet doors. All edges
Determine
can be seen and must be finished for the best
appearance.
Custom
Panel
Sizes
*Height is equal to A minus 5-1/8" plus 1/4"
EXAMPLE:
*Height = 30-1/2" minus 5-1/8" plus 1/4" is equal to 25-5/8".
WARNING
To prevent electrical shock,
disconnect electrical power
supply to dishwasher
before changing panels.
Do not operate dishwasher
when door assembly is
removed.
Screw Y
Screw X
(6) Not Used
Custom
Countertop
Panel Size
Cabinets
Dim. A*
Floor
3/4" Max.
Bottom of
Adjacent Cabinetry
ZPF75 Custom Panel Kit
Note: It is best that 2 people perform this installation.
The ZPF75 provides for the installation of
1/2" to 3/4" thick custom door panel.
Note: Maximum custom panel weight is
10 pounds.
vaisselle quand la porte est déposée.
Screw Z
(2) Support Bracket
Screws
Top
• Measure dimension A, from underside of
3/4" Thick
*Height
countertop to bottom of adjacent cabinets.
Door Panel
– Subtract 5-1/8". Control panel height is 5".
23-1/8"
– Add 1/4". The custom panel will slide up,
3/4" Thick Custom Door Panel
AVERTISSEMENT
Pour éviter les
électrocutions, il faut
débrancher l'alimentation
électrique du lave-vaisselle
avant de changer les
panneaux. Il ne faut pas
faire fonctionner le lave-
Door Springs
Allow 1/8" for gap between bottom of
countertop and top of control panel.
behind control panel.
Metal Door
Support
Bracket
19