Step 23 Install Toekick; Step 24 Literature - GE Built-In Dishwashers Installation Instructions Manual

STEP 23 INSTALL TOEKICK
• Locate toekick and screws set aside in step 5.
Attachment
Screws
Figure JJ
• Replace the toekick and make sure it is against the floor.
• Insert and tighten the 2 toekick attachment screws. The
toekick should stay in contact with the floor to ensure quiet
dishwasher operation.
STEP 24 LITERATURE
• Be sure to leave complete literature package, Installation
Instructions and product samples with the consumer.
Pub. No. 31-30246
Part No. 206C1559P184
10-08 JR
Toekick
NOTE: While performing installations described in this book,
safety glasses or goggles should be worn.
For Monogram ® local service in your area, call
1.800.444.1845.
NOTE: Product improvement is a continuing endeavor at
General Electric. Therefore, materials, appearance and
specifications are subject to change without notice.
GE Consumer & Industrial
Appliances
General Electric Company
Louisville, KY 40225
ge.com