GE Monogram ZBD5600 Installation Instructions Manual page 22

• Slip toekick slides into guides by pulling out
Step 7
Install
• Hold custom panel against toekick slides
Custom
• Remove toekick and drill 1/8" pilot holes.
Toekick
• Remove toekick slides and secure panel to
• Insert the assembled toekick into the
• Carefully, slide assembly back until it is
• See product installation instructions to
• Carefully, hold the door and open fully.
the metal tabs.
and mark screw hole locations.
slides with 2 screws each. Use screws "X". If
panels are 1/2" thick, use caution when
driving these screws.
support brackets by pulling out the metal
tabs.
aligned with adjacent cabinetry toekick.
reinstall the dishwasher.
Insure that door does not strike top of
toekick.
ZPF75 Custom Panel Kit
3/4" Thick Custom Door Panel
Screw X
Pull Tab While Pushing toekick in
22