LG LSW900 series Owner's Manual page 20

> RTP multicast: When enabled it reduces the transmission load
on the camera by making the computer of the same segment
network receive the same transmission data. When multicast
option is checked then select Video Port number, Audio Port
number and Data port number.
- Video RTP port: Specify the video transmission port number
used for the multicast streaming.
- Audio RTP port: Specify the audio port number used for the
multicast streaming.
- Data RTP port: Specify the VA data port number used for
the multicast streaming.
- IPv4 address: Set the IP address for RTP multicast.
Note:
Each stream using multicast needs its own pair of multicast IP
address and port numbers to avoid address conflict.
• Save: Click this button to confirm the settings.
20
TCP/IP
IPv4 address status
> Automatically set with DHCP: Select this option when a
DHCP server is installed on the network to allow IP address
assignment. With this setting, the IP address is assigned
automatically.
- Notify to SMTP server, if IP address is changed: If you select
this option, the user get a notification mail telling about
changing of IP of the IP device.
Note:
You should register the SMTP server on the Event server setting
to set this function.
> Statically set: Select this option when you set a fixed IP address,
with this setting, specify the IP address, Subnet mask and
default gateway manually.
- IPv4 address: Enter an IP address.
- Subnet mask: Enter a subnet mask address.
Operation and settings