Network Settings - LG LSW900 series Owner's Manual

Network settings

Basic
General
> MAC address: Displays the MAC address.
Port & Encryption
> Web port: The default HTTP port number (80) can be changed to
any port within the range 1 025 to 65 535.
> RTSP port: Check RTSP port. The default port is 554. Other ports
can be selected within the range 1 025 to 65 535.
> Network encryption: Select the HTTP or HTTPS option for
security.
Note:
The RTSP port number should not be same with the web port
number.
TTL
> TTL: This option indicates the Time-To-Live of multicast packets.
The default setting is 7, and the allowed TTL range is from 1 to
255.
Operation and settings
ARP Ping
> Enable ARP Ping to configure IP address: Check to enable ARP
ping.
• Save: Click this button to confirm the settings.
RTP stream
RTP (Real-time Transport Protocol) is an internet protocol that allows
programs to manage the real-time transmission of multimedia data, via
unicast or multicast.
Master / Slave
> RTP unicast: When enabled the transmission of the data to the
specified equipment happens on a network specifying a single
address.
19