LG LSW900 series Owner's Manual page 43

AGC (Automatic Gain Control) setting
If the images are too dark, change the maximum
[AGC] value to make the images bright.
1. Select the [AGC] option on the [EXPOSURE] menu.
2. Use or button to select a value.
WDR/BLC setting
Use WDR/BLC option to set the options for BLC or WDR camera.
1. Select [WDR/BLC] option on the [EXPOSURE] menu.
2. Use or button to select a mode then press
• WDR LEVEL: WDR (Wide dynamic range) feature can be very
helpful to cope with very challenging lighting conditions. It
is capable of capturing both of the dark part and bright part
and combining the differences into a scene to generate a
highly realistic image as original scene. Set the WDR level (LOW,
MIDDLE, HIGH).
• BLC LEVEL: Camera's backlight compensation feature helps
alleviate issues of visibility in high contrast areas. Set the BLC
level (LOW, MIDDLE, HIGH).
• HSBLC: Use for masking brightness of the specific area to view
the subject more clearly.
- HSBLC LEVEL: Select the HSBLC level. (LOW, MIDDLE, HIGH).
- COLOR: Use or
• OFF: Not used.
BRIGHTNESS setting
You can increase the brightness of the darkened video. If you set the
brightness to lower value, the image gets darkened. If you set the
brightness to higher value, the image gets bright.
1. Select [BRIGHTNESS] option on the [EXPOSURE] menu.
2. Use or button to set the bright level.
Operation and settings
.
button to select a color.
SHUTTER (Shutter Speed) setting
Select the desired shutter speed for camera exposure. You can change
the shutter speed to higher speed to capture fast-moving subjects,
though the image becomes darker.
1. Select [SHUTTER] option on the [EXPOSURE] menu.
2. Use or button to set shutter speed.
SENS-UP setting
If pictures are not clear due to darkness, use this function to increase
the sensitivity of picture.
1. Select [SENS-UP] option on the [EXPOSURE] menu.
2. Use or button to set the SENS-UP limit. To set the SENS-UP
function, select the [AUTO] on the [SHUTTER].
Note:
If you set to one of the SHUTTER options except AUTO on the [SHUTTER]
menu, the [SENS-UP] setting is not available and [---] mark is displayed.
43