LG LSW900 series Owner's Manual page 15

• Remove: Click to delete the preset position.
1. Select the preset from the list.
2. Click the [Remove] button. The preset will be deleted.
• Go to preset: Move to the preset position.
1. Select the preset from the list.
2. Click the [Go to preset]. The camera will be moved to the
selected preset.
Preset tour
A preset tour is composed of a group of preset positions that the
operator can link together in a sequence.
> To tour the preset positions
1. Choose the preset in the [Preset].
2. Click the [Add] button in the [Preset tour].
3. Repeat the steps 1 to 2 to add another preset.
4. Click the [Save] button to confirm the preset tour.
5. Click the [Play] button to start the preset tour.
6. Click the [Stop] button to stop the preset tour.
Note:
If you control the PTZ or OSD, the preset tour will be stopped.
> Remove: Click this button to delete the selected preset in the
[Preset tour].
Operation and settings
=============================================
PTZ protocol (LNP3700T/LNP2800/LNP2800I models only)
Allows the user to configure different PTZ controls by using different
PTZ protocols.
PTZ configuration
> Enable: Click to use the PTZ protocol.
> Pan speed: Enter the panning speed of the PTZ device in the
edit box. Default value for the LG Multix Protocol is 60 and
ranges from 0 to 127.
> Tilt speed: Enter the tilting speed of the PTZ device in the edit
box. Default value for the LG Multix Protocol is 60 and ranges
from 0 to 127.
> Zoom speed: Enter the zoom speed of the PTZ device to view
the object close or at a distance. Default value for the LG Multix
protocol is 1 and ranges from 0 to 3.
> Focus speed: Enter the focus speed of the PTZ device to focus
an object clearly near or far. Default value for the LG Multix
protocol is 1 and ranges from 1 to 3.
> Preset tour park time: Enter the parking time.
• Save: Click this button to confirm the settings.
15