LG LSW900 series Owner's Manual page 9

Time zone
Set the time difference from GMT in the area where the IP device
is installed. Select the time zone in the area where the IP device is
installed from the drop down list.
Time mode
> Synchronize with NTP Server: Select if you want to synchronize
the IP device's date and time with those of the time server
called NTP (Network Time Protocol). Specify the NTP server's
name. Click the [Test] button for connection test to the server.
> Synchronize with personal computer: Select if you want to
synchronize the IP device's date and time with your computer.
> Synchronize manually: Select if you want to set the IP device's
date and time manually. Select the year, month and date by
clicking the calendar button. Set hour, minutes and seconds in
the edit boxes.
Notes:
•
When system reboot after time setting, time of system
could be delayed. If you set the time correctly, set the
[Synchronize with NTP server] option.
• Refer to NTP configuration as operation system of the
Recording Server when the Recording Server use recording
function and NTP server.
Server time
> Server time: Displays the current date and time of the IP device.
• Save: Click this button to confirm the settings.
Operation and settings
Maintenance
System reboot
Click the [Reboot] button to restart the IP device. It takes some minutes
for the IP device to start again.
Restore and backup
> Backup: To take a backup all of the settings. If necessary, it
make possible to return to a backuped configuration.
1. Click the [Backup] button.
2. Click the [Save] button.
3. Follow the instructions on the browser to specify the folder.
4. Click the [Save] button to save the settings.
> Restore:
1. Click the [Browse] button.
2. Find and open the file in which the configuration setting
data is stored.
3. Click the [Restore] button and the system settings will be
restored and reboot the system.
9