LG LSW900 series Owner's Manual page 31

WDR/BLC (Option)
Use Backlight option to view the object clearly in backlight conditions.
1. Select [WDR/BLC] option on the [EXPOSURE] menu.
2. Use or button to select a mode then click
• WDR (Option): WDR (Wide dynamic range) feature can be very
helpful to cope with very challenging lighting conditions. It is capa-
ble of capturing both of the dark part and bright part and combin-
ing the differences into a scene to generate a highly realistic image
as original scene. Set the WDR limit.
> ACE (Adaptive Contrast Enhancement) : This function is used
when you want to display dark areas of WDR brightly.
• BLC: Camera's backlight compensation feature helps alleviate issues
of visibility in high contrast areas. Set the BLC limit.
• HSBLC: Use for masking brightness of the specific area to view the
subject more clearly. The HSBLC mode is automatically activated
only in low luminance scene.
> AREA SETTING: Use or
or button to select [ON] or [OFF]. Click
area setting menu.
> GRAY SCALE: Use or
> USER SCALE: Use or
> MASK: Use or button to select [ON] or [OFF].
If you set the MASK to ON, the mask function is activated only
when the HSBLC is activated by auto mode.
• OFF: Not in use.
Operation and settings
button.
button to select area then use
button to exit the
button to select a gray scale.
button to select a bright level.
BRIGHTNESS
You can increase the brightness of the darkened video. If you set the
brightness to lower value, the image gets darkened. If you set the
brightness to higher value, the image gets bright.
1. Select [BRIGHTNESS] option on the [EXPOSURE] menu.
2. Use or button to set the bright level.
AGC (Automatic Gain Control)
If the images are too dark, change the maximum [AGC] value to make
the images brighter.
1. Select the [AGC] option on the [EXPOSURE] menu.
2. Use or button to select a mode.
SHUTTER (Shutter Speed)
Select the desired shutter speed for camera exposure. You can change
the shutter speed to higher speed to capture fast-moving subjects,
though the image becomes darker.
1. Select [SHUTTER] option on the [EXPOSURE] menu.
2. Use or button to set shutter speed.
SENS-UP
If pictures are not clear due to darkness, this SENS-UP operation would
increase the sensitivity of picture.
1. Select [SENS-UP] option on the [EXPOSURE] menu.
2. Use or button to select a mode.
• AUTO: Adjust the sensitivity of the picture automatically.
> SENS-UP LIMIT: Use or
SENS-UP limit.
> EXIT: Select a mode and click
button to set the
button to exit the menu.
31