Pan/Tilt Settings - LG LSW900 series Owner's Manual

PAN/TILT Settings

Privacy Mask setting
This function is aiming at the protection of personal privacy, the mask
zone is not displayed on the screen. Up to 8 zones can be registered.
1. Select the [PRIVACY MASK] option on the [PAN/TILT MENU].
2. Press button to display the PRIVACY MASK MENU.
3. Use or button to select a zone number on the [MASK
NUMBER] option.
Operation and settings
.
4. Select the [SET MASK] option and press
5. Select the mask zone using the PTZ control buttons and then press
button to save it.
6. Use or button to set to [ON] or [OFF] on the [MASK STATE]
option. If you already registered the mask zone and set to ON, the
mask zone box appears on the monitor.
7. Use or button to select the color of the mask zone box on the
[MASK COLOR] option.
8. Select the [WIDTH] option and use
horizontal size of the mask zone box.
9. Select the [HEIGHT] option and use
vertical size of the mask zone box.
10. Repeat steps 3 to 9 to add additional positions.
Notes:
•
The parts with the registered mask numbers from 1 to 4 have the
same color. (So do the parts with the numbers from 5 to 8). If you
change the mask color, the registered mask color will be changed
automatically with the same color for each of group (1 to 4, 5 to 8).
• The initial PRIVACY MASK color is set to black . After setting, the
PRIVACY MASK position on [SET MASK] option, it`ll be changed to
gray color.
Be sure, you have to press
confirm the privacy mask color.
button.
or button to adjust the
or button to adjust the
button on the [SET MASK] option to
47