Table of Contents
Advertisement
Replacement routines
4.3
Replacing iBBU
Together with the LSI 1078 controller, an iBBU can be installed.
Ê Remove the storage blade as described in
blade" on page
Ê Open the storage blade as described in
on page 14
Figure 6: Unscrewing the iBBU
Ê Remove the three screws at the housing ground of the storage blade.
Ê Turn round the storage blade.
SX940
13.
Review
section "Removing the storage
section "Opening the storage blade"
Replacing iBBU
19
Advertisement
Table of Contents
