Table of Contents
Advertisement
3
Safety notes
I
The following safety notes are also provided in the "Safety notes and
other important information" manual.
This device complies with the relevant safety regulations for data processing
equipment.
V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Before operating the device
V
CAUTION!
During installation and before operating the device, observe the
●
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
●
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
●
Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Installation and operation
V
CAUTION!
Never connect or disconnect data transmission lines during a storm
●
(lightning hazard).
●
Make sure that no objects (such as bracelets or paper clips) fall into
or liquids spill into the device (risk of electric shock or short circuit).
Proper operation of the device (in accordance with IEC 60950/
●
EN 60950) is only ensured if the casing is completely assembled and
the rear covers for the installation openings have been put in place
(electric shock, cooling, fire protection, interference suppression).
SX940
Review
11
Advertisement
Table of Contents
