Procedure - Fujitsu PRIMERGY SX940 Manual

2

Procedure

V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Ê First of all please familiarize yourself with the safety instructions in the
chapter "Safety notes" on page
Ê Ensure that all required manuals (see Service DVD) are available, printing
out the PDF files if necessary. You will definitely need the Operating Manual
for the server, the Options Guide for the server and the Technical Manual for
the system board.
Ê Shut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the
on page 13.
Ê Replace the faulty component as described in the relevant chapter.
Ê Close the storage blade
Ê Push the storage blade in the slot.
Ê Put the storage blade into operation.
1
These procedures are described in the Operating Manual.
SX940
11.
section "Removing the storage blade"
1
1
Review 9