Replacing Sx940 Complete (With Cabling) - Fujitsu PRIMERGY SX940 Manual

Replacing SX940 complete (with cabling)

4.4 Replacing SX940 complete (with cabling)
If the controller, the iBBU, and the cables will be quite correct you have to
change the remain parts. The cabling in the spare part „SX940 complete with
cabling" is already installed.
Ê Remove the storage blade as described in
blade" on page
Ê Open the storage blade as described in
on page 14.
Ê Remove the iBBU as described in
Ê Remove the controller(s) as described in
Ê Remove all HDDs.
Ê Install the controller(s) in the spare part. See the descriptions in
"Controller" on page 16
Ê Install the IBBU inthe spare Part as described in
on page 19.
Ê Install the HDDs in the spare part.
22
13.
and chapter "Different configurations" on page
Review
section "Removing the storage
section "Opening the storage blade"
section "Replacing iBBU" on page
section "Controller" on page
section "Replacing iBBU"
Replacement routines
19.
16.
section
SX940
23.