Configuration: Four Hdds Using One Lsi 1078 Controller - Fujitsu PRIMERGY SX940 Manual

LSI 1078 controllers
V
ACHTUNG!
All unused cable ends have to be equipped with protective caps to avoid
short curcuits!
Ê Lay the unused cable ends of the two SAS cables at suitable locations.
5.2.2 Configuration: Four HDDs using one LSI 1078
controller
Ê Remove the storage blade as described in
blade" on page
Ê Open the storage blade as described in
on page 14.
Prerequisites
No controller installed, HDDs not connected.
Figure 16: Configuration: Four HDDs using one LSI 1078 controller
Ê Plug the controller into the contact strip (1) of the main boardrd #1 and fix it
with a screw C26192-Y10-C68 (blue circle).
Ê Plug the connector HOST of the lower SAS cable into the SAS connector
MLC1 (2) on the controller.
Ê Plug the connector P1 of the SAS cable into the connector on the HDD
diskbay 0/1 (3).
30
13.
2
1
5
section "Removing the storage
section "Opening the storage blade"
Review
Different configurations
3
4
SX940