Table of Contents
Advertisement
Before you start
Dig away the earth and remove any stones near the
tree stump that may interfere with your work. Check
that the ground is free of foreign objects, such as
electrical cables, barbed wire, etc.
Cut or trim the stump as necessary using a power
saw.
•
Review all of the machine's safety decals.
•
Use a helmet (hard hat), ear and eye
protection. A mesh visor alone does not
provide sufficient eye protection; supplement
with protective glasses.
•
Make sure that you are familiar with safety
regulations and shutdown procedures
described previously in the operator's manual.
•
Make sure that all guards are in place and in
good condition.
•
Make sure that the blades and cutters are in
place and in good condition.
•
Make sure that the work area and cutter in
particular are free from metallic objects such as
wire, nails, etc. that could be thrown out and
injure persons in the vicinity and damage the
equipment.
•
Make sure that everyone, including children
and animals, maintains a distance of at least
15 m from the machine. Debris can be thrown
out and injure people and animals.
22 – English
RUNNING
8011-141
8011-191
8011-193
8011-192
Advertisement
Table of Contents
