Table of Contents
Advertisement
Maintenance
•
Never make adjustments with the engine
running.
•
Disengage the drive units, activate the parking
brake, shut off the engine and wait until all
moving parts come to a complete stop before
making adjustments, performing maintenance
or cleaning the machine.
•
Disconnect the spark plug cable before
beginning repair work.
•
Keep all components in serviceable condition
and make sure all nuts, bolts, etc. are tight.
Replace worn or damaged decals.
•
Be careful when checking the work tools. Use
gloves when performing maintenance work.
•
Do not disassemble the engine. This may
invalidate your guarantee. Please contact your
dealer if you have any questions regarding
service or guarantee matters. Follow all
maintenance instructions.
•
Do not change the setting of governors and
avoid running the engine with overly high
RPMs. If you run the engine too fast, you risk
damaging the machine components.
•
Do not modify safety equipment. Check
regularly to be sure it works properly. The
machine must not be run with defective or
disassembled safety equipment.
•
The muffler is designed to maintain sound
levels at an approved level and to keep direct
exhaust away from the user. Exhaust gases
from the engine are extremely hot and may
contain sparks that can cause fires or burn the
user.
•
Reduce the risk of fire by removing grass,
leaves and other debris that may have
fastened in the machine.
SAFETY INSTRUCTIONS
Remove the spark plug cable.
WARNING!
Wait until all moving parts are
completely still before performing
maintenance on the machine. Turn
off the engine and remove the
spark plug cable.
Keep the machine clean.
8011-027
8011-210
English – 11
Advertisement
Table of Contents
